Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Picture of correct wearing way of safety helmet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
Hard Hat, head protection with engineering advancements in suspension design, a lightweight shell, a patented UV indicator, and numerous customization options, the 3M™ ,Hard Hats, H-700 and H-800 series help alleviate workers' frustration with ,hard hats, on the job. The H-700 and H-800 - innovations in comfort and protection you expect from 3M.
One common misconception is that ,hard hats, have a predetermined service life - that is not the case. Both the 1986 and 1997 ANSI standards address service life under maintenance and care of the ,hard hat,. All ,hard hat, components should be inspected daily for signs of dents, cracks, penetration and any damage due to impact, rough treatment, or wear.
Here are the steps how to wear a safety helmets: Put the safety helmet upside down with the front peak facing away from you. Pull the suspension system out of the safety helmet to check and make sure that no webbing is wrapping around the headband. Ensure that the adjustable ratchet or tab is in the opposite direction of the front peak - that is the back of the safety helmet. Install the head band.
According to the ANSI/ISEA standard, ,hard hats, must also contain user information such as instructions pertaining to sizing, care and service life guidelines. Every ,hard hat, conforming to the requirements of ANSI Z89.1-2014 must be appropriately marked to verify its compliance. The following information must be marked inside the ,hard hat,:
Hard hat, turns ,100, this year, inventor’s family celebrates all year ,Hard hat, inventor Bullard kicks off 100th anniversary celebration The ,hard hat, turns ,100, VAC-U-MAX announces banner year for company milestones – 65-year anniversary - President’s 50-year employment - new President announcement
Wearing a ,safety helmet, that is fitted and comfortable on your head is only the beginning – ,safety helmets, need to fit for the task at hand while providing the user with a suitable level of protection against physical factors. Dig into how a ,safety helmet, must be properly selected, fitted, and used in this blog.
Safety helmet are designed to protect the head against falling objects and the side of the head, eyes, and neck from any untoward impacts, bumps, scrapes, and electrical exposure, etc. Wearing a safety helmet is a mandatory requirement that should be followed by all employers who should provide their workers with hard hats/safety helmet and fully ensure that they wear them.
Once the abnormal situation is found the ,helmet, need to be replaced immediately, and it should no longer be used. Any cracked ,helmet,, whether or not damaged, should be scrapped anyway. 6. The ,safety helmet, with only the connected mandible strap and cap should not be used. These are the ,safety helmets, that have no buffer layer. 7.
ERB, MSA, Bullard, Lift, and more! Full brim and cap styles, along with custom, hydro-dipped ,hard hats,. ,Hard Hats, for lineman, ironworkers, arborists, electricians, welders, construction workers, factory workers, and ever trade in between! Online and locally in Ozark and Springfield, Missouri.
Always wear your safety helmet with the brim of the helmet facing forward, unless the safety helmet is labeled with a reverse donning symbol indicating you have an option to wear in forward or backward positions; Skin abrasions of any kind are a sign that you are not wearing your safety helmet at an appropriate size; Other Safety Helmet Considerations