Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Notice to wear safety helmet in production area
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
Two ,helmets, were discovered ,not, to ,comply, with UNECE (United Nations Economic Commission for Europe Regulation) ,safety, standards while the third ,does not comply, with the US Department of Transportation (DOT) standard. Children’s off road, motocross and BMX ,helmet, FF601:JX-F601.jpg.
Difference Between Compliant and Non-compliant. What you must know when choosing a ,helmet, is that it meets minimum ,safety, standards. The way to find a well-made, reliable ,helmet, is to look for the DOT and/or Snell sticker on the inside or outside of the ,helmet,.
In addition, 1910.135(a)(2) states; The employer shall ensure that a protective ,helmet, designed to reduce electrical shock hazard is worn by each such affected employee when near exposed electrical conductors which could contact the head, to ,comply, with hard hat regulations.
3 What stickers and labels ,does, my ,helmet, need? Police in most states believe an AS1698 CAB sticker must be on the exterior of the ,helmet, but it is ,not, specified in any regulations where the CAB sticker should be placed. The AS1698 standard only requires a label sewn into the liner. UNECE 22.05 only needs a label on the chin strap or liner.
A few weeks ago, the ,helmet, manufacturer Shark recalled 2,538 RAW model ,helmets, for defects after it was discovered they did ,not comply, with the federal Motor Vehicle ,Safety, Standard. The product failed to meet the impact attenuation requirement, which is critical as a …
Rugged ABS ,Helmet, Shell One-Of-A-Kind Full-Coverage Liner of Interlocking Foam Revolutionary Fit Kit To Fully Customize Your ,Helmet, Multi-Point Strap Adjustment No-Pinch Buckle No-Sweat Air Vents WARNING: This ,helmet does NOT comply, with the U.S. CPSC ,safety, standard for bicycle ,helmets, for persons age 5 years and older and therefore can ,NOT, be shipped to customers under 18 years old in ...
4. What should an A&P Show/Event equestrian personnel ,do, if a competitor’s ,helmet does not, have a red tag? Utilise the ,safety, checking standard guide and check ,compliance,. If it complies, advise competitor they must get it tagged immediately after the Show. If it ,does not comply, the competitor should be asked to leave the ring. 5.
If the protective headgear ,does not, fit right, it may ,not, offer the same level of ,safety,, nor will the user ,comply, with wearing it if it is ,not, comfortable. ,Helmet, Features and Options Our protective headgear selections offer a vast array of features and special options to fulfill unique, individual requirements.